321 material properties Related introduction

  1. Alloy 321/321H Heat Resistant Stainless Steel Plate ...

    General Properties. Alloy 321 (UNS S32100) is titanium stabilized austenitic stainless steel plate with good general corrosion resistance. It has excellent resistance to intergranular corrosion after exposure to temperatures in the chromium carbide precipitation range of 800 - 1500F (427 - 816C).

  2. AISI 321 (S32100) Stainless Steel :: MakeItFrom.com

    AISI 321 stainless steel is an austenitic stainless steel formulated for primary forming into wrought products. 321 is the AISI designation for this material. S32100 is the UNS number. Additionally, the British Standard (BS) designation is 321S12. The properties of AISI 321 stainless steel include two common variations.

  3. Properties: Stainless Steel - Grade 321 (UNS S32100)

    321 is similar to 304, but uses titanium as a stabiliser. They differ in that they are resistant to intergranular corrosion after heating to temperatures in the carbide precipitation range. Applications include aircraft exhaust manifolds, furnace parts, heat exchangers, furnace parts etc.

  4. 321 Stainless Steel Sheet, Coil, Plate & Bar - AMS 5510, 5645

    321 is a titanium stabilized austenitic chromium-nickel stainless steel which was developed to provide an 18-8 type alloy with improved intergranular-corrosion resistance. This material is stabilized against chromium carbide formation by the addition of titanium. Since titanium has a stronger affinity for carbon than chromium, titanium carbide precipitates within the grains instead of forming 321 material properties

  5. AISI Type 321 Stainless Steel, annealed sheet - MatWeb.com

    Material Notes: Titanium-bearing, austenitic, chromium-nickel steel. Stabilized against carbide precipitation and designed to work within the temperature range where carbide precipitation develops. Similar to Type 304 except Ti content helps prevent chromium carbide precipitation resulting from welding or elevated temperatures.

  6. www.clevelandmetal.com

    www.clevelandmetal.com

  7. 1.4541 (AISI 321), S32100 | Datasheet | METALCOR

    1.4541 / AISI 321 is an austenitic chromium-nickel-stainless steel, stabilized with titanium. Special properties Good corrosion resistance to low content of hydrochloric and organic acids.

  8. 321 Austenitic Stainless Steel Bar | Interlloy ...

    321 is a titanium stabilised chromium-nickel austenitic stainless steel with good strength and excellent corrosion resistance, as supplied in the annealed condition with a typical brinell hardness of 175.Characterised by high corrosion resistance in general atmospheric corrosive environments it exhibits excellent resistance to most oxidizing agents, general foodstuffs, sterilizing solutions 321 material properties

  9. 321 Stainless Steel (1.4541) Data Sheet - Nationwide ...

    Grade 321 stainless steel (1.4541) is a heat resistant grade supplied into numerous industry sectors. The key property of this grade is the added titanium content (5 x C%) stabilising the material and making its resistance to carbide precipitation when exposed to high temperatures and resistance to oxidation its main characteristics.

  10. AK Steel 321 Austenitic Stainless steel - MatWeb.com

    Material Notes: AK Steel 321 is a stabilized austenitic stainless steel similar to Type 304 but with a titanium addition. This titanium addition reduces or prevents carbide precipitation during welding and in 427 - 816C service.

  11. 321/321H Stainless Steel products in Stock - Penn ...

    General Properties. Alloy 321 (UNS S32100) is a titanium stabilized austenitic stainless steel with good general corrosion resistance. It has excellent resistance to intergranular corrosion after exposure to temperatures in the chromium carbide precipitation range of 800 1500F (427 816C).

  12. Stainless Steel Tube - AMS 5557 - Alloy 321

    Welded or Seamless Stainless Steel Tube - AMS 5557- 321 Tube AircraftMaterialsUK.com Ltd +44 (0)1494 484844 - Global Supplier of European and U.S. Alloys

  13. 321 - Rolled Alloys, Inc.

    321 stainless is a titanium stabilized grade commonly used for service in the 1000-1600F temperature range. For service temperatures up to about 1600F, a stabilizing treatment at 1550-1650F, air cool, may be used to provide optimum resistance to intergranular corrosion and to polythionic acid stress corrosion cracking.

  14. SS 321 vs SS 316L - CR4 Discussion Thread

    Re: SS 321 vs SS 316L 01/08/2008 12:09 PM The molybdenum gives 316 better overall corrosion resistant properties than Grade 321 (similar to 304, with Ti addition to improve temperature property within 800-1500 deg F), particularly higher resistance to pitting and crevice corrosion in chloride environments.

  15. Grade 321 Stainless Steel Technical Data - askzn.co.za

    Stainless Steel - Grade 321 CS 321 Technical Data . CS 321 is a titanium-stabilised version of CS 304, used in particular applications within the sensitizing temperature range. Its resistance to sensitization, coupled with its higher strength at high temperature makes it suitable in application where CS 304 will become sensitized, or where CS 304L has insufficient hot strength.

  16. ASTM A182 F321 Stainless Steel Flanges, 304/304L/316L ...

    All raw materials purchased by Steber Steel to manufacture ASTM A182 F321 Stainless Steel flanges is fully traceable to mill source. All stainless steel flanges are manufactured in India, with raw materials coming from reputed Indian and Overseas Mills. Brand: Steber, Ukraine Origin, US Origin, European Origin, Japan Origin, Korean Origin

  17. Stainless Steel: Tables of Technical Properties

    Physical properties of stainless steels The attached collection of data reflects inquiries directed to stainless steel development associations. The enclosed documents are for information only and cannot replace reference to either EN 10088, or EN 10095.

  18. Material Data Sheet 1.4541, 321, S 32100 :: M. Woite GmbH

    Description. The stainless austenitic steel 1.4541 is mainly used in the chemical industry and building industry. Our product range in 1.4541 are tubes and pipes, fittings and flanges, accessories.

  19. Core 321/4541 EN 1.4541, ASTM TYPE 321 / UNS S32100 ...

    Core 321/4541 can be welded in all dimensions without becoming susceptible to intergranular corrosion. The austenitic CrNi standard grades are the most widely used group of stainless steels. Their well-balanced material properties make them suitable for the fabrication of many products.

  20. Alloy 321 - Premium Stainless Steel Grades - NeoNickel

    Alloy 321 stainless is a titanium stabilized grade commonly used for service in the 538-870C temperature range. For service temperatures up to about 870C, a stabilizing treatment at 842-899C air cool, may be used to provide optimum resistance to intergranular corrosion in the heat affected zone (HAZ), and to polythionic acid stress 321 material properties

  21. Stainless steel - Wikipedia

    Stainless steel is a modern trend for roofing material for airports due to its low glare reflectance to keep pilots from being blinded, also for its properties that allow thermal reflectance in order to keep the surface of the roof close to ambient temperature.

  22. Stainless Steel - AISI 321 - online catalogue source ...

    Alloy 321 is a general purpose austenitic stainless steel with a face centered cubic structure. It is essentially non-magnetic in the annealed condition and can only be hardened by cold working. Titanium is added to supress grain boundary Chromium Carbide precipitation and reduce susceptibilty to intergranular corrosion.

  23. ASTM A479 Grade 321 annealed - Stainless Steel - Matmatch

    See the chemical composition and physical properties of ASTM A479 Grade 321 annealed, find alternative materials, and connect with suppliers. This website uses cookies to improve service quality. You will find more information about cookies on the privacy policy page.

  24. Shims Alignment Tools Supplies - American Metals Co ...

    Welcome to metalshims.com, a division of American Metals Co. Since 1984, American Metals Co. has been providing high quality metal shims, including AMC Accu-size brand pre-cut stainless steel slotted shims for alignment (304 stainless steel and 316 stainless steel), Undercut bolts, Laser Alignment Tools, and custom shims / shim stock for industrial and commercial applications.

  25. Related searches 321 material properties

    ss 321 material properties, material properties database, material properties table, material mechanical properties, 416 ss material properties, matweb, properties of materials pdf, material properties definitions, list of material properties, material properties of soil, aluminum material properties, material properties wood,

Online Consultation